MULTIFLEX SYSTEM

The high-power pallet shuttle system for warehouses

Freely scalable and highly dynamic.

Through the interaction of the CARRIER, COMPACT SHUTTLE and LIFT previously unknown handling capacities are achieved – and in confined spaces. Flexible thanks to high rated loads of up to 1,500 kg and free mobility across all levels. Due to the integrated control, it can be expanded by additional elements at any time. Perfect in combination with the new high-performance conveyor system MONOFLEX.

MONOFLEX SYSTEM

The highly dynamic conveyor system for the apron

The newly developed vehicle called RAIL CART runs on floor installed two-rail system.

The rail system is made of anodized aluminum. This is not only easy to install, but also robust. Narrow radii of 1.5 m allow maximum use of space. The distribution switch with switching times of only approx. 2 seconds ensure high throughput.

The DAMBACH transport cart is not only extremely compact, but also very light. In combination with inductive energy transfer and power caps as energy storage, the energy requirement is significantly reduced. Thanks to the short vehicle length, several vehicles can be used simultaneously at the transfer points, even in the smallest of spaces.

The integrated control and optional head control make the system flexible for customers.

Brochures

Download your desired product information here

In our download section you will find comprehensive information and data sheets on the various DAMBACH products.

The shuttle system for pallet warehouses

Free mobility across all levels

Depending on the power requirement, the DAMBACH CARRIER in the MULTIFLEX SYSTEM can supply several levels. Thanks to the rapid transfer using vertical conveyors, optimal use of space is achieved even with less throughput. Retrofittable CARRIER and COMPACT SHUTTLE enable an increase in performance at any time. Flexible and scalable - can also be retrofitted to existing warehouses of low overall height.

Forum

Innovations and development trends in intralogistics

Speech:
MONOFLEX – The inductive rail system with integrated vehicle management

DAMBACH Lagersysteme
Dirk Lorenz
Dr. Benjamin Thumm

Product presentation

The new inductive rail system from DAMBACH Lagersysteme

The live presentation of the new DAMBACH inductive rail system will take place on Wednesday, March 11th, 2020 from 10:00 a.m. – we are looking forward to it.

Interaction between MULTIFLEX and MONOFLEX

240 storage / retrieval operations per hour in the high-bay warehouse with 6 CARRIER and 6 SHUTTLES and 4 cable lifters.

260 to 300 pallet movements per hour with 15 electric floor vehicles.

New Division
DAMBACH COMPONENTS

Partner of storage and conveyor manufacturers

The independent DAMBACH COMPONENTS division offers a wide range of high-quality load handling devices and conveyor technology elements.

Whether proven telescopic solutions, powerful pull-push grabbers or conveyor elements such as vertical conveyors - maximum service life, high reliability and short transfer times are significant. With the new headquarters of DAMBACH COMPONENTS in the heart of Munich, the division not only emphasizes its independence, it also offers additional sales opportunities.

Double-deep telescopic fork

Multi-deep pallet storage

DAMBACH telescopic forks for double-deep storage of pallets, lattice boxes, trolleys and others are characterized by particularly high quality materials and excellent functionality.

With enormously high bending stiffness and top-class kinematic driving values, they set efficiency standards in double-deep storage. Tine geometries tailored to the requirements enable optimal use of free spaces and approach dimensions. Manufacturers of storage and conveyor systems can thus expand their degrees of freedom and simplify control processes. To reduce energy consumption or mast vibrations, DAMBACH also offers weight-optimized telescopes made of high-strength aluminum. Thanks to the standardized telescope set, DAMBACH can offer a wide variety of telescopes. Application in deep freeze environments is possible without any problems.

Brochures

Download your desired product information here

In our download section you will find comprehensive information and data sheets on the various DAMBACH products.

Box grabber for small load carriers

Variable pull-push grabber for various cardboard boxes

The DAMBACH box grabber is ideal for a variety of different box sizes.

Up to 5 gripping fingers enable fast up to four times deep storage and retrieval. Coated motor rolls and adjustable side panels enable the safe and reliable handling of different container and box sizes. Up to 100 kg rated load and the handling of up to 4 loads at the same time make the DAMBACH box grabber versatile. Thanks to its lightweight construction and integrated drives, the DAMBACH box grabber is not only light, but also very compact. Powerful servo motors with integrated control predestine the box grabber for dynamic load handling. The unconditionally freezer-capable design also makes the box grabber universally applicable.

3D online configurator

For the individualization of your load handler

Find the desired load handler quickly using a simple online configuration.

Thanks to the direct provision of the required technical parameters such as own weight, extension path, interference contour and connected load, the planning effort for manufacturers of storage technology is reduced. This not only increases productivity but also reduces possible interface errors. With over 45 years of experience in the development and production of load suspension devices, DAMBACH supplies sophisticated components.
Configure now: www.dambach-components.de

Forum

Innovations and development trends in intralogistics

Speech

Load Handling without Switch Cabinet
Dr.-Ing. Benjamin Thumm

The new EN 618 requirements for Pit Lifters
Robert Ratzisberger
Claudius Burg

Product presentations

Box grabber with integrated regulation and control electronics

Double-deep telescopic fork in a lightweight design

Live presentation of the DAMBACH load handling devices will take place on Wednesday, March 11th, 2020 from 10:00 a.m. – we are looking forward to it.

Product presentation

The new inductive rail system from DAMBACH Lagersysteme

The live presentation of the new DAMBACH inductive rail system will take place on Wednesday, March 11th, 2020 from 10:00 a.m. – we are looking forward to it.

Forum

Innovations and development trends in intralogistics

MONOFLEX – The inductive rail system with integrated vehicle management

DAMBACH Lagersysteme
Dirk Lorenz
Dr. Benjamin Thumm

Forum

Innovations and development trends in intralogistics

Product presentations

Box grabber with integrated regulation and control electronics

Double-deep telescopic fork in a lightweight design

Live presentation of the DAMBACH load handling devices will take place on Wednesday, March 11th, 2020 from 10:00 a.m. – we are looking forward to it.

Forum

Innovations and development trends in intalogistics

Load Handling without Switch Cabinet
Dr.-Ing. Benjamin Thumm

The new EN 618 requirements for Pit Lifters
Robert Ratzisberger
Claudius Burg

Forum

Innovations and development trends in intralogistics

Deutsch